Home Catalog Contact Chambless Cine Equipment Home Order Form Shipping Terms of Purchase


 

WE ARE CURRENTLY AVAILABLE ON A MORE LIMITED BASIS FOR SALES AND SERVICE.

THANK YOU FOR YOUR PATIENCE.

NEW, DEMO & USED Electric Motors for H16 Bolex

America's Premier Bolex Dealer

Recent change in Bolex International SA factory ownership

in Yverdon, Switzerland.

NEW Bolex product PRICES are subject to Change

BolexTM ESM Motor Package. Electronically regulated speeds of 10-18-24-25-50 fps) Complete with: 1,2 Ah Ni-Cd Battery, Charger, Handgrip. Works only on cameras with 1:1 shaft: Sockets for crystal/sync pulse accessory, remote control. H16 RX-4/5 SB/SBM, M-4/5, S-4, also H8 RX-4. (CH)

More Info

Catalog # 260660

$1,950.00 NEW Special Order Only

BolexTM ESM Motor Only (without accessories) Electronically regulated speeds of 10-18-24-25-50 fps, Works only on cameras with 1:1 shaft: Sockets for WM & MM magazine motor for crystal/sync pulse accessory and remote control. H16 RX-4/5 SB/SBM, M-4/5, S-4, also H8 RX-4. (CH)

More Info

Catalog # 260111

$990.00 NEW Limited stock

BolexTM ESM Motor Only (without accessories) Speeds of 10-18-24-25-50 fps, Works only on cameras with 1:1 shaft: Below S/N 5000 Sockets for crystal/sync pulse accessory, remote control & MM Motor. Works on H16 RX-4/5 SB/SBM, M-4/5, S-4, also H8 RX-4. (CH)

More Info

Catalog # 260111+

$595.00 USED

BolexTM EM Motor Only (without accessories) designed for filming without synchronous sound recording. Speeds of 12-25 fps, sockets for WM & MM magazine motor, also remote control. Works only on cameras with 1:1 shaft: H16 RX-4/5 SB/SBM, M-4/5, S-4, also H8 RX-4. (CH)

Catalog # 260001+

$595.00 NOS or Slightly Used

$495.00 USED

Picture not available at this time

BolexTM 705.70.12 MST and MCE17B "MOLEC" Motor Remote Cable With Switch, two male pins at end of remote.

Cat # 732.049

$39.00 NEW

$29.00 Slightly Used

MERITEX K-206 FOOT CONTROL

JKCamera/MeritexTM Optional Foot Control 6 ft. : for K-206 Animation Motor. (us)

Catalog # CCE FRC

$75.00 NEW
MERITEX K-206 HAND CONTROL

JKCamera/MeritexTM Optional Hand Control 6 ft. : for K-206 Animation Motor. (US)

Catalog # CCE HRC

$25.00 NEW
JKCamera/Meritex 110V-A/C ITSM/BXAC Microprocessor Animation & Interval-Timer: Range 1.6 sec to 1.6 hrs; Works only on Bolex cameras with 1:1 shaft: H16 RX-4/5 SB/SBM, M-4/5, S-4, also H8 RX-4. (US)

More Info

Catalog # 40210+

No Longer Available New

Sorry, no stock at this time consider the DC/AC version
JKCamera/Meritex D/C-A/C ITSM/BXDC Microprocessor Animation & Interval-Timer: 12 V/DC normal, however will operate on 120V/AC. Range from 1.6 sec to 1.6 hrs; Works only on BolexTM Cameras with 1:1 shaft: H16 RX-4/5, SB/SBM, M-4/5, S-4 also H8 RX-4. One of our best selling Time-Lapse Units. (US)

More Info

Catalog # 40220+

Sorry, No Longer Available New

$795.00-$1,195.00 USED ONLY

No picture at this time

JKCamera/Meritex A-120DE Animation Motor with Remote Control. For BolexTM H16 RX-4/5, SB/SBM, M-4/5, S-4 also H8 RX-4.

Catolog # A-120DE

$695.00 USED
No picture at this time

JKCamera/Meritex Special Metal Mounting Plate to use the Meritex K206 Animation Motor on the BolexTM H16 EBM Camera.

Catalog # JK-EBM-MT

$49.00 NEW
   
NORRIS TIME-LAPSE We have some excellent USED NORRIS Time Lapse for Bolex models with the one-to-one shaft for sale. (US) $ 895.00 & UP, USED
   
STEVENS TIME-LAPSE We do have NEW Timing Pins, Motors and Other Parts for the STEVENS MODEL 100 CINE-TIMER

STEVENS ANIMATION MOTOR

For H-16 Bolex with 8-frame rewind shaft only

Designed for BolexTM H16 Cameras uses the 8:1 shaft. Runs on 110V AC. Has a remote control switch for single frame or continous run. Mounts under the camera and works with the round base and square base cameras. (US)

Exposure time for the BolexTM 1440 shutter is 0.8 second, for 1700 shutter is 0.94 second.

Catalog # CCE-ANI-8:1

$495.00 NOS

Tobin DC Animation and Time-Lapse Motor: 12 V/ DC normal, however can operate on 120V/AC see adapter below. Comes with hand control for animation; Time range 2 to 60 sec.; and 1 to 60 min.; Works only on BolexTM cameras with 1:1 shaft: H16 RX-4/5, SB/SBM, M4/5, S-4, also H8 RX-4. Small Compact Unit. (US)

More Info

Catalog # TCS TTL

Sold Out discontinued by factory.
 

Tobin Cable for TCS TTL to BolexTM MM magazine torque motor. (US)

Catalog # TCS TTL-MM

$39.00 NEW
 

Tobin TCS TTL to 120V 13A 1560W AC lamps. (US)

Catalog # Relay Box

$99.00 NEW
No picture currently available

Tobin Crystal Motor, 5 speeds, 12, 15, 24, 30 and 48 fps.

Runs on 12 Volt DC Battery (Not included)

Motor is for Spring-Wound BolexTM H16 & H8 works on 1:1 shaft, best for cameras above S/N 210'601.

Catalog # TXM-20B

$795.00 Sorry, sold out discontinued by factory

Tobin Crystal Motor, 6 speeds, 7.5, 12, 15, 24, 30 and 48 fps. Motor for all Spring-Wound BolexTM H16, works on 8:1 shaft, best on cameras above S/N 100'401. (US)

More Info

Catalog # TCS TXM-26C

Sold Out discontinued by factory
 

AC Power Supply 100-250V AC to 12 V regulated 1A for the TOBIN Time Lapse TTL with or without magazine (Has 4-pin female XLR connector).

Catalog # TCS AC Power Supply for TTL Only

$45.00 NEW
 

AC Power Supply 100-250V AC to 12 V regulated 3.33A for Multi-Speed Crystal Motors: TXM10B, 20B, 20Ba, 20Be, 26, 26B and 26C (US) (Has 4-pin female XLR connector).

Catalog # TCS AC Power

$99.00 Temp. Out Of Stock (ASK)
 

Tobin Cable for TSC, TXM-D, TXM-18, -20, -20B, -20Ba, -20Be, -20K (US)

Catalog # TCS DE-9 M-F

$15.00 NEW

 

Home Catalog Contact Order Form Shipping Terms of Purchase

Copyright 2020 ChamblessCine Equipment