Home Catalog Contact Chambless Cine Equipment Home Order Form Shipping Terms of Purchase


 

CHECK VIA EMAIL TO SEE IF WE ARE OPEN.

THANK YOU FOR YOUR PATIENCE.

Miscellaneous Bolex Camera Accessories

America's Premier Bolex Dealer

Recent change in Bolex International SA factory ownership

in Yverdon, Switzerland.

NEW Bolex product PRICES are subject to Change

20 page catalog illustrating recent Bolex 16mm Cameras and Accessories (Last Edition Published by Bolex).

Catalog # 297.003

$19.95 NEW. USA postage prepaid

BolexTM Ni-Cad-battery Pack 12V/0.8 Ah with Cable for the H16-EL. (Clips on Camera.) (CH)

Catalog # 261.455

$585.00 NEW Not designed for rapid/fast charging.

Re-cell your (clip on camera) BolexTM H16-EL 12V/0.8mAh battery with 12V/1.2 Ah Ni-Cad Cells

Service is done in our shop, you must send old battery.

$149.00 SERVICE. Check with us before sending!!

If your are currently charging through the GREEN PLUG on the end of your battery. We suggest you let us change the plug on the your charger to charge the way the Factory has designed everything for 2021. There is a charge for this service.

Re-cell your (clip on camera) BolexTM H16-EL 0.8mAh battery with 2,150 mAh Ni-MH Cells

Service is done in our shop, you must send old battery.

$199.00 SERVICE. Check with us before sending!!

If your are currently charging through the GREEN PLUG on the end of your battery. We suggest you let us change the plug on the your charger to charge the way the Factory has designed everything for 2021. There is a charge for this service.

BolexTM NiCad-battery Pack 12V/1.2 Ah without Cable, for H16-EL, H16-EBM, ESM Motor and EM Motor. (CH)

Catalog # 261.550 Very Limited Stock

$600.00 NEW Not designed for rapid/fast charging.

Re-cell your (over the shoulder pack) BolexTM H16-EL, H16-EBM, ESM Motor and EM Motor battery with 1.8 Ah Ni-Cad Cells.

Service is done in our shop, you must send old battery.

$169.00 SERVICE. Check with us before sending!!

Re-cell your (over the shoulder pack) BolexTM H16-EL, H16-EBM, ESM Motor and EM Motor battery with 3.3 Ah Ni-MH Cells. Will require longer charge time.

Service is done in our shop, you must send old battery.

$249.00 SERVICE. Check with us before sending!!

 

BolexTM Re-celled (over the shoulder pack) BolexTM H16-EL, H16-EBM, ESM Motor and EM Motor battery with 1.8 Ah Ni-Cad Cells.

Catalog # POSAN

$349.00

Re-celled Standard Charge Version

 

BolexTM NiCad-battery Pack 12V/1.2 Ah , for H16-EL and EM Motor, with Cable 265020. (CH)

Catalog # 261.660

$690.00 NEW Not designed for rapid/fast charging.

BolexTM Power Supply Cable 4M/4FM 47" for H16 EL & ESM and EM Motor. (CH)

Catalog # 265.020 Check for availability

$120.00 NEW

BolexTM Electric On/Off Release Cable for H16-EL, ESM & EM Motor (CH)

Catalog # 265.005 Check for availibility

$225.00 NEW
BolexTM Standard 220/240V/50Hz Charger for the 12V / 0,8 and 1,2 Ah Battery on the H16-EL and EM Motor Battery. (Plugs into battery socket). (CH) Works with original type batteries.

Catalog # 261.882 Not a stock item Special Order Only

$195.00 NEW Sorry currently out of stock

BolexTM Standard 110/120V/60Hz Charger for the 12V / 0,8 and 1,2 Ah Battery on the H16-EL and EM Motor Battery. (Plugs into battery socket). (CH) ) Works with original type batteries.

Catalog # 261.884

$195.00 NEW Sorry currently out of stock
CCE/Bolex Standard 110/120V/60Hz Charger for the 12V / 0,8 and 1,2 Ah Battery on the H16-EL and EM Motor Battery. (Plugs into battery socket). (us) Works with original type batteries.

Catalog # 261.884C Available Very Limited Stock

$195.00 NEW
BolexTM Charger for H16EL 12V/12V allows you to recharge 12V batteries from DC supplies 10 to 15V (e.g. car battery 12V) Charging time normally 14 hours. Works with original type batteries.

Catalog # 261.900 Very Limited stock

$249.00 NEW

BolexTM Rapid Charger for EL & ESM 4.5, 0,8 & 1,2 Ah Batteries (CH) For use with batteries designed for rapid/fast charging only. Has European Mains Plug for other counties you will need an adapter.

Some of you electronic wizards might convert to standard charging only.

Catalog # 261.990

$820.00 $295.00 NOS UN-USED (Sold As-Is) discontinued by factory.

BOLEX S8 BATTERY CHARGER
No Picture at this time

BolexTM Battery Charger for Super 8 Cameras. European Mains Plug for 180-260 50 Hz 3-9V 50 mA . CH

$149.00 NOS Not for the USA
BOLEX H16 EL HANDGRIP

BolexTM 263.110 Pistol Grip for Electric Release for all H16 EL Cameras. (CH)

For flat-based H16 cameras equipped with the EM or ESM electric motor powered by the 261.660 power-pack or H16 EL camera. Equipped with a built-in micro-switch and a rapid attachment device, it is supplied with a cable for plugging into the remote control socket of the motor or the camera.

It can be supplied with a DEVAR 265.030 cable for connecting up to the Vario-Switar 100 POE 16-100 mm f/1.9 for diaphragm preseletion.

Works with all models of the H16 EL I - 310xxx, EL II - 311xxx, EL III - 312xxx and forward.

Catalog # 263.110

$00.00 NEW Special order only (ONLY available if and when factory reopens)

BolexTM Brand Pistol Grip for Electric Release for H16 EL (CH)

This one works only with H16 EL I Three Pin S/N 310xxx

Catalog # ELPOI

 

Sorrry sold out

BolexTM H16-EL Synchro Flash Relay. Use for single frame filming. (CH)

Catalog # 266.990 Limited stock.

$270.00 NEW

BolexTM Remote Control Unit/Timer for H16-EL single frame or burst (CH )

More Info

Catalog # 266.880

NO LONGER AVAILABLE NEW

BolexTM Remote Control Unit/Timer for H16-EL single frame or burst (CH )

More Info

Catalog # 266.880D

$1,595.00 DEMO Limited stock.

$1,295.00 USED Limited stock.

H16 EBM Camera, ESM & EM Motors

BolexTM Power Grip PONAL 261.001 with Battery Compartment without Battery (CH)

(for H16 EBM Electric camera and H16 camera equipped with the ESM or EM motor)

This grip incorporates a compartment for the battery and is fitted with a rapid attachment device. It has a start button and a button for diaphragm preselection of the Vario-Switar 100 POE. Designed to fit the contours of the hand, the grip can be swivelled to the most convientient position and the length of the strap adusted, thus ensuring excellent control over the camera.

Catalog # 261.001

$920.00 NOS Sorry not available

BolexTM Power Grip PONAL 261.001 with Battery Compartment w/o Battery (CH)

(for H16 EBM Electric camera and H16 camera equipped with the ESM or EM motor) Includes Quick Attachment Disc. Some will not have the extra button for lens or locking start/stop button

Catalog # PONAL

$460.00 Used Will show some wear

$345.00 Heavier Used Shows more wear

$299.00 UGLY Works May have cracked grip & or missing strap.

 

No picture at this time

BolexTM CAVAR 265.025 Electric Cable for full opening of the Vario-Switar 100 POE diaphragm preselection by means of the EBM/ESM/EM PONAL 261 .001 power hand grip.

Catalog # 265.025

$89.00 NEW

Catalog # CAVAR

$59.00 USED

No picture at this time

BolexTM DEVAR 265.030 Metal Cable for connecting hand grip HAFRA or HAFEL to the Vario-Switar 100 POE for diaphragm preslection. Very limited stock

Catalog # DEVAR

$35.00 USED not available new
BolexTM BC 3347 New Replacement Front Cap for EBM Handgrip. Limited stock. (CH)

Catalog # 700.463

$90.00 NEW

BolexTM Camera Base EBSOC 263.220 (instead of using Power Grip on EBM) Has tripod mounting hole in bottom. (CH)

Catalog # EBSOC

$349.00 USED Only. Not available new

$299.00 HEAVIER Use but complete

BolexTM NiCad-battery Pack 261.550 12V/1.2 Ah , H16-EBM with Cable 265.015. (CH)

Catalog # 261.770

$825.00 NEW Not designed for rapid/fast charging.

BolexTM Cable 4M/3FM from Power Supply with On/Off Release Cable for 12V/1,2 Ah Ni-Cad Pack 261.550 to EBM Camera Base EBSOC 263.220 and ESM Motor up to S/N 4'000.(CH)

Catalog # 265.015

$225.00 NEW
PICTURE CURRENTLY IS NOT AVAILABLE BOLEXTM EBM BATTERY 12V/1.2 Ah EBM/ESM/EM Hand Grip or Container Ni-Cd Battery (From Bolex factory in Switzerland) replaces obsolete DEAC Battery, designed to work with original BolexTM EBM/ESM/EM charger. (ch)

Catalog # 261.110

$405.00 Special order: Not currently available Factory Closed!

BOLEXTM EBM BATTERY 12V/1.4 Ah EBM/ESM/EM Hand Grip or Container Ni-Cd Battery (Especially Fabricated for CCE in USA). Replaces obsolete VARTA DEAC Battery, designed to work with original BolexTM EBM/ESM/EM charger. (At this time there is no know problem shipping Ni-Cad internationally). (US)

Catalog # 261.110C

$150.00 NEW In stock now

BolexTM BATTERY CONTAINER COTAC 261.220 designed to hold above battery, this special container supplies power directly to the ESM, EM motors or the H16 EBM Electric camera equipped with camera base. (requires certain cables). (CH)

Catalog # COTAC

WAS $350.00 NEW

$175.00 USED Not available new anymore

$125.00 HEAVIER USE but complete

BolexTM Universal Cable SOCUN 265.050 7M/7M, 3'-4" / 1 m Power Supply and Other Uses. (CH)

Catalog # 265.050

$120.00 NEW
BolexTM Cable CASOC 265.010 7M/3FM from Power and Remote Control Cable for Battery Container 261.220 and H16 EBM Camera Base EBSOC 263.220. (CH)

Catalog # 265.010

$225.00 NEW
BolexTM Off Camera Charging Tray CABAC for EBM/ESM/EM Battery 261.110C. Can be used only with Original Powder Blue (BATOC) Charger (Without Rewiring). (If you want to have this Rewired to accept current style charger add $50.00) (CH) Extremely Limited Stock

Catalog # CABAC

$99.00 USED Not available new

No picture at this time

BolexTM replacement bulb for the Light Blue BACHA EBM/ESM Multi-voltage Charger.

Catalog # SR 1301

$5.64 NEW

No picture at this time

BolexTM replacement fuse for the Light Blue BACHA EBM/ESM Multi-voltage Charger.

Catalog # SR 1300

$3.15 NEW

BolexTM Charger EBM/ESM 220/240V/50Hz .(CH) Works with original type batteries. Has EURO Mains plug.

Catalog # 261.332

$195.00 NEW One available
BolexTM Charger EBM/ESM 110/120V/60Hz. (CH) Works with original type batteries. Has USA Mains plug.

Catalog # 261.334

$195.00 NEW Sorry, sold out

CCE/BolexTM Charger EBM/ESM 110/120V/60Hz. Works with original type batteries.(US) Has USA Mains plug.

Catalog # 261.334C Very Limited Stock

$195.00 NEW
BolexTM Charger H16EBM/ESM 12V/12V Allows you to recharge 12V Ni-Cad batteries from DC supplies 10 to 15V (e.g. car battery 12V) Charging time normally 14 hours. (CH)

Catalog # 261.901 Extremely Limited Stock

$249.00 NEW

BolexTM Ni-Cad-battery Pack 12V/1.2 Ah with Power Supply Cable Primarily for ESM Motor (CH)

Catalog # 261.660 Very Limited Stock

$690.00 NEW Not designed for quick charging

Accessories Common to All H16 Spring Motor Cameras
and Small Parts

BolexTM Right Angle Viewfinder with Adapter for all H16 Cameras EL, EBM, SBM & RX-5 with 13X Viewfinder from Serial Number 253'020 Very Limited stock. (jp/CH)

Catalog # 266.550

$600.00 NEW

BolexTM Pistol Grip with Mechanical Release for Bolex Spring Flat Base Cameras. includes Rapid Attachment Disc and 3-Way Screwdriver. (CH)

For Flat-Based H16/H8 Cameras not equipped with an electric motor. It is particularly suitable for hand-held filming with a camera fitted with a Vario-Switar lens. It is provided with a rapid attachment device. It can be supplied with a cable for connecting to the Vario- Switar 100 POE 16-100mm f/1.9 for the pre-selection of the diaphragm.

Catalog # 263.001

$420.00 NOS

BolexTM Pistol Grip with Mechanical Release for Bolex Spring Flat Based Cameras includes Rapid Attachment Disc and 3-Way Screwdriver if listed. (CH

Catalog # HAFRA

$280.00 DEMO includes Disc & 3-Way Screwdriver

$210.00 USED does not include Disc or 3-Way Screwdriver

$149.00 UGLY Heavier Use does not include Disc or 3-Way Screwdriver

BolexTM RX-Fader Complete with Winding Handle for Variable Shutter H16 Camera.(CH)

Catalog # 266.330

$330.00 NEW

BolexTM RX-Fader Complete with Winding Handle for Variable Shutter H16 Cameras. (CH)

Catalog # FADOM-D

$220.00 DEMO
BolexTM RX-Fader Complete with Winding Handle for Variable Shutter H16 Cameras. (CH)

Catalog # FADOM-U

$110.00 USED

$99.00 USED earlier style with shorter Start/Stop lever than shown

BolexTM Complete Winding Handle with Special Longer RX-Fader Knob for H16/H8 with RX-Fader. (CH)

Catalog # 265.112

$112.00 NEW Sales limited to one per customer
BolexTM Complete Winding Handle with Standard Knob for H16/H8 use on cameras without RX-Fader. (CH)

Catalog # 265.111

$97.00 NEW Sales limited to one per customer

$65.00 Used show wear
Spare parts are available to rebuild your present winding handle
BolexTM BCE1130X1: 4-mm Backwind Crank

For H16S/H16T Cameras S/N above 196'601-->, (CH)

For H16M Cameras S/N above 187'001-->, (CH)

For H16RXOV Cameras S/N above 186'925-->, (CH)

For H16RX-1 thru H16RX-5, H16 SB/SBM, H16 EBM, H16 EL Cameras S/N above 196'601-->, (CH)

For H8S/H8T/H8RX Cameras above 188'401-->. (CH)

Catalog # 265.110 Sorry out of Stock Factory closed
BolexTM BCE1130, 3-mm Backwind Crank for Cameras below Serial Numbers for Cameras listed above. (CH)

Catalog # 700.097

$66.00 NEW
Bolextm Backwind Crank to use with older H8/16 Cameras Without Rex-O-Fader. This longer handle will strike the Rex-O-Fader mechanism. The camera mounting drive is 3-mm designed for cameras below Serial Numbers listed above. (CH)

Catalog # BC 1130

$39.00 USED Not available new

USE REWIND BELOW FOR EXTERNAL FRAME COUNTER
Bolextm H8/H16 Backwind Crank for Paillard Bolex Add-On External Frame Counter on Early H Cameras. Notice the longer connecting shaft to go in the frame counter to backwind. For those who wish to make lap dissolves, fades, superimpositions and wipes accurately. (CH) (Also can be used for early H8/16 cameras before any frame counter, for rewind or advance of film).

Catalog # BWEFC

$39.00 USED Not available new

USE REWIND ABOVE

Bolextm Backwind for Bolex Regular/Normal 8 Pocket Cameras with Backwind Shaft. (CH)

Catalog # BXE2350

$39.00 USED Not available new

BolexTM BCE2847, Carrying Handle for H16 RX-5/EL/EBM/ SBM & M5 with Magazine Hatch. (You will need to heat the screws to remove them, they have LOCTITE sealer.) (CH)

Catalog # 700.388

$90.00 NEW
BolexTM BCM923M1, Carrying Handle for All H8/H16 Cameras Through RX-4 and SB. (You will need to heat the screws to remove them, they have LOCTITE sealer.)(CH)

Catalog # 700.077

$48.00 NEW
BolexTM Cable Release 21" (51.4 cm) with Side Adapter Socket. For cameras with or without RX-Fader installed. (DE)

Catalog # 265.035

$105.00 NEW
BolexTM Cable Release 21" (51.4 cm) with Side Adapter Socket. For cameras without RX-Fader installed. (DE)

Catalog # 265.035NR

$81.00 NEW

BolexTM Cable Release 21" (51.4 cm) without Side Adapter Socket. 3mm screw-in tip. (DE)

Catalog # 265.034

$29.00 NEW

$24.00 NOS

 

BolexTM All Metal Cable Release 21" (51.4 cm) without Side Adapter Socket. 3mm screw-in tip. (ch)

Catalog # DETEL

$20.00 NOS

$10.00 USED

BolexTM All Metal Cable Release 20" without Side Adapter Socket. 3mm screw-in tip. (ch)

Catalog # DECLA

$20.00 NOS

$10.00 USED

No Picture at this time BolexTM All Metal Cable Release 11.5" Normally used to activate the lens from handgrip.

Catalog # DEVAR Extremely Limited Stock

$45.00 USED not available new

No Pitcure at this time BolexTM All Metal Cable Release 14" (350mm) used primarily with the STAIC Surefire grip (was the original that came with it) without Side Adapter Socket. 3mm screw-in tip. (ch)

Catalog # BX 1452 J

$20.00 NOS

$12.00 USED

GITZOTM Extra flexible Cable Release 20" (50 cm) Bent Tip Version bound in metal coil (Also fits Pathe Cameras). 3mm screw-in tip. (FR)

Catalog # GP10050

$38.00 NEW
GITZOTM Extra flexible Cable Release 40" (100 cm) Bent Tip Version bound in metal coil (Also fits Pathe Cameras). 3mm screw-in tip. (FR)

Catalog # GP100100

$51.00 NEW

BolexTM 8" (20 cm) Cable Release with Lock (If you plan to do a continous run you need the lock) for the BolexTM Super 8 Model 150, 155 & 160 Cameras. Regular 8mm Models K-1, K-2 and S-1 also P-1, P-2 and P-3. Will work with any camera with 3mm screw-in socket. (CH)

Catalog # DERAC

$24.00 NEW
No Picture at this time

BolexTM BX-58 Single Frame Release Device for BolexTM Super 8 150 & 155 Cameras. Lets you do single frame for Animation, Stop Motion, Tricks ETC. CH

Catalog # BOL-1030 Very Limited Stock

$49.00 SLIGHTLY USED not available new

BolexTM Side Adapter Socket for Cable Release. For cameras with or without RX-Fader installed. 3mm screw-in socket. (CH)

Catalog # 265.038

$81.00 NEW

BolexTM Side Adapter Socket for Cable Release. For cameras with or without RX-Fader installed. 3mm screw-in socket. (CH)

Catalog # CLOVI

$40.50 USED May show some straigtening marks or dents

BolexTM Side Adapter Socket for Cable Release. For cameras without RX-Fader installed. 3mm screw-in sockest. (CH)

Catalog # CLOHE

$50.00 NOS

$25.00 USED

BolexTM Front Adapter Socket for Cable Release. Not designed to allow single frame filmming. 3mm screw-in socket. (CH)

Catalog # CLOIC

$50.00 NOS

$25.00 USED

BolexTM Self Timer Model "A" for Bolex H8/H16 and all small models cameras except those mention down with "Model B" Timer. It starts the camera operating 6 seconds after timing mechanism has been set, for a scene of from 5 to 20 seconds and then stops the "take". Ideal when moviemaker wants to get into the picture himself. Selftimer is connected to the cable release adapter CLOIC. (CH)

Catalog # DEMAT

$59.00 USED not available new

BolexTM Model "B" Self Timer for the Bolex Zoom Reflex P-1, P-2, and Automatic K-1 Regular 8mm Cameras. (CH)

Catalog # DEZOR

$59.00 USED not available new

BolexTM Original Black Elliptical Rubber Eyepiece for all H8/16 RefleX, RX, EBM & EL Cameras. (CH)

Catalog # 265.660 Very Limited Stock

$40.00 NEW Latest Black style from Bolex Factory.
BolexTM Original Gray Elliptical Rubber Eyepiece for all H8/16 RefleX, RX, EBM & EL Cameras. (CH)

Catalog # BCE3890H

Sorry, sold out
BolexTM BX 1180, Original Style Rubber Eyepiece for Octameter & H8/16 RefleX or RX-1 Camera 6X Viewfinder. (CH) (Not Elliptical) Preferred by some people with eyeglasses

Catalog # 704.503

$45.00 NEW Sorry currently sold out of new ones.

$23.00 USED (Good condition) (Probably will be black color)

$10.00 VERY USED Complete, may be slightly misshapened

BolexTM Original Rubber Eyepiece for Super 8 Models 563XL, 564SLAF & 583. (CH)

Catalog # SR 1920 Very Limited Stock

$49.00 NEW
BolexTM Original Rubber Eyepiece for Super 8 Model 150. (CH)

Catalog # BC 6144M5 Very Limited Stock

$49.00 NEW

BolexTM These are Custom made by Bolex Factory to replace originals which are no longer available.

Rubber Eyepiece for Super 8 Models 155 & 160 also 250 & 280. (CH) Now easier to install.

Catalog # BC 6458 Very Limited Stock

$55.00 NEW

BolexTM These are Custom made by Bolex Factory to replace originals which are no longer available.

Rubber Eyepiece for BOLEX Super 8 Models 550, 551, 580 & 581 also 5120 & 5122. (CH)

Catalog # M548-A85 Very Limited Stock

$55.00 NEW
NOTICE These are Custom made by Bolex Factory will replace some CHINON originals which are no longer available. Rubber Eyepiece for CHINON Super 8 Models 60SMR; 806SM; 1200 SM; Pacific12SMR; and other CHINON SOUND Cameras that have two screw holes. When removing your old eyecup, watch out for the ball bearing. DON'T LOSE IT. (CH)

Catalog # M548-A85

$55.00 NEW

BolexTM Original Rubber Eyepiece for Super 8 Bolex Models 525 XL and 625 XL. (jp)

Catalog # M52-722 Very Limited Stock

$39.00 NEW

BolexTM Original Rubber Eyepiece for Super 8 Bolex 7.5 MACROZOOM. Very Limited Stock. (ch)

Catalog # BCE4263

$49.00 NEW

BolexTM Original Rubber Eyepiece for Super 8 Bolex Models 660 and 680 MACRO-ZOOM". (au)

Catalog # 534 5300 Very Limited Stock

$49.00 NEW

BolexTM Original Rubber Eyepiece for Super 8 Bolex Model 233 COMPACT and 350 MACRO COMPACT. (au)

Catalog # 516.5252 Very Limited Stock

$39.00 NEW
BolexTM Dust Cap for Cameras with Bayonet Mount (Plastic). For the H16 SB, SBM, EBM and EL. (CH)

Catalog # 704.771

$37.00 NEW
BolexTM Turret Dust Cap for all C-Mount (Metal). (CH)

Catalog # 265.220

$18.00 NEW
BolexTM Turret Dust Cap for all C-Mount (Metal). (CH)

Catalog # 265.220+

$12.00 USED
BolexTM Turret Locking Screw for H8/16 Reflex Cameras (Smaller thread of the two, goes in the 8:00 O'Clock Turret Hole). (CH)

Catalog # 265.221

$24.00 NEW
BolexTM Turret Locking Screw for H8/16 Reflex Cameras. (Smaller thread of the two, goes in the 8:00 O'Clock Turret Hole). CH)

Catalog # 265.221+

$16.00 USED
BolexTM All Black Turret Locking Screw for Latest H16 Reflex Cameras. (Smaller thread of the two, goes in the 8:00 O'Clock Turret Hole). (CH)

Catalog # 265.221B

$24.00 NEW

BolexTM Turret Locking Screw for H16 Non-Reflex Cameras (Larger thread of the two, goes in the 11:00 O'Clock Turret Hole). (CH)

Catalog # BC 2265

$24.00 NEW
BolexTM Turret Locking Screw for H16 Non-Reflex Cameras (Larger thread of the two, goes in the 11:00 O'Clock Turret Hole). (CH)

Catalog # BC 2265+

$16.00 USED
BolexTM Turret Dust Cap for all D-Mount Cameras (Metal). (CH)

Catalog # BC 2264

$18.00 NEW
BolexTM Turret Dust Cap for all D-Mount Cameras (Metal.) (CH)

Catalog # BC 2264+

$12.00 USED
BolexTM Turret Locking Cap/Screw for H8 D-Mount Non-Reflex Cameras (Metal). Goes in the 11:00 O'ClockTurret Hole. (CH)

Catalog # BC 2219

$16.00 USED not available new

BolexTM Turret Dust Cap for B8/C8 Regular 8 Cameras. (CH)

Catalog # BC 3006+

$12.00 USED not available new

BolexTM Turret Locking Screw for B8/D8 Regular 8 Cameras. Your camera must be equipped with locking plug SR 765 to use this. (CH)

Catalog # BXE1495+ RARE FIND

$39.00 USED

Matte Boxes/Compendiums

BolexTM Matte Box B with Mattes and Mounting Sliding Rail. (DE)

Sunshade, Filter Holder, etc. This accessory greatly simplifies the achieving of trick effects, such as entering a room through a keyhole, making the same person appear several time on the same frame, on-the-spot titling, etc. Supplied with a set of masks and acetate sheets.

Catalog # 266.220

$840.00 NEW special order only. Used ones are available.

BolexTM Sliding Rail for fitting Matte Box to Camera Front on all H16 Cameras from RX-3, M-3 or S-3 forward, including EBM & EL. Rail design may vary slightly from picture, still works perfect in all applications. (Spare) (DE)

Catalog # 265.773

$55.00 NEW

$45.00 Lightly USED

Picture currently not available BolexTM Complete Set of Replacement Mattes for current B-Type Matte Box) (De)

Catalog # Spec Order

$139.00 NEW
Picture currently not available BolexTM Complete Set of Replacement Mattes for earlier A-Type Matte Box. (DE)

Catalog # Spec Order

$139.00 NEW
Rare BOLSEY or BOOLS CINE-FADER Auto Compendium. Opens Scenes. Closes Scenes. Device allows 4 possibilities by rotating black masks. Spring driven. Fastens on the outside of thel lens barrel. Can be used with almost any brand Cine Camera. VERY Limited stock.

Catalog # BO-FADER

$89.00 USED not available new.
Rare PAILLARD-BOLEX IRIS 16mm Fader/Vignetter fits Switar 25mm f/1.4, Switar 25mm f/1.5, Genevar 25mm f/1.9 and Pizar 26mm f/1.9 Lenses. Screws down inside the lens barrel, or front ring of lens. VERY Limited stock. Adapter to lens may vary from picture. Design may vary slightly.

Catalog # BO-1260

$49.00 USED not available new.

Factory Camera Cases

Picture not available We do have USED Bolex Factory Aluminum Metal Cases for most 400 ft. models at a good prices.
Picture not available We do have USED Bolex Factory Aluminum Metal Cases for most 100 ft. models at a good prices.
Picture not available BolexTM Aluminum Case for Bolex H Cameras 100' Capacity. (CH)

Smaller version for cameras without 400 feet (120m) magazine. Carries H16 EL cameras or any H16 100 feet ready for use, i.e. camera equipped with fixed focal length or zoom lens as well as an auxiliary electric motor and power hand grip. A large compartment holds accessories, including the matte-box and monopod. The case is airtight. Dimensions: 54 x 39 x 20 cm. or 21.2598 x 15.3543 x 7.874 in. Extremely Limited Stock

Catalog # 264.660

$600.00 NEW

 
 

Home Catalog Contact Order Form Shipping Terms of Purchase

Copyright 2021 ChamblessCine Equipment