| Home | Catalog | Contact |
 |
Order Form | Shipping | Terms of Purchase |
CHECK VIA EMAIL TO SEE IF WE ARE OPEN.
THANK YOU FOR YOUR PATIENCE.
Tripods, Bases, Adapters and Grips
Recent change in Bolex International SA factory ownershipin Yverdon, Switzerland. New BOLEX product PRICES are subject to Change |
||
 |
Super-Stix (Bolex Type Swiss Made by Schweizer AG) aluminum tripod without head with lift column, 90mm leveling ball, rubber/spike feet, 8 lbs or 3.63 kg. Suitable for use with all 16 mm Cameras.The tripod preferred by many National TV News Services for use with their Video Cameras. (CH)Catalog # 263.340 SSList Price: $1,595.00Our Price: $1,175.00
NEW
|
|
|
Super-Stix with Miller SR F 102 Fluid Head. (CH&AU) Catalog # IDEM List Price: $2,750.00 Our Price: $2,155.00 NEW |
|
|
||
 |
Bolex Professional Monopod 22" to 63" or 53cm to 160cm, 780g 1.7196 lbs. (CH) Catalog # 263.660 $450.00 NEW |
|
 |
Bolex Shoulder Brace for use with Rapid Attachment System. Can be used with all flat-based H16 Cameras, as well as the H16 EL/EBM Electric Cameras The Bolex harness is well padded and completely adjustable to individual physical equirements. (CH) Catalog # 263.770 $750.00 NEW |
|
 |
A practical, rugged and light weight shoulder brace with BOLEX rapid attachment device. The camera mounting plate can be adjusted both vertically and horizontally. Can be used with almost any brand camera. We have found this system very practical for places where you cannot set up a tripod. Also allows faster movement in crowed locations. (CH) Catalog # 263.770 $750.00 NEW |
|
 |
Bolex Rapid Attachment Disc with 3/8"-16 European Screw. (CH) These Disc are from the Bolex Factory and are case hardened Steel. Beware many after market makes that may not be case hardened Steel. Catalog # 265.770 $00.00 NEW sorry sold out |
|
 |
Bolex Rapid Attachment Disc with 3/8"-16 European Screw. Guide pin on edge may be broken or missing, not needed for most applications.(CH) These Disc are from the Bolex Factory and are case hardened Steel. Beware many after market makes that may not be case hardened Steel. Catalog # 265.770+ (Limit one per customer) $50.00 USED |
|
 |
Bolex Rapid Attachment Disc with 1/4"-20 USA Kodak Screw. (CH) These Disc are from the Bolex Factory and are Case Hardened Steel. Beware many after market makes that may not be case hardened Steel. Catalog # $00.00 NEW sorry sold out |
|
 |
Bolex Rapid Attachment Disc with 1/4"-20 USA Kodak Screw. Guide pin on edge may be broken or missing, not needed for most applications.(CH) These Disc are from the Bolex Factory and are Case Hardened Steel. Beware many after market makes that may not be case hardened Steel. Catalog # Available Special Request $60.00 USED (Limit one per customer) |
|
 |
BOLEXTM BX 2469M3 3-Way Flat Screw Driver (use with Rapid Attachment Disc, and other applications). (CH) Catalog # 704.629 $18.00 NEW $12.00 USED |
|
 |
BolexTM BC 540 Bushing Adapter to change H8/H16 Camera Tripod Hole from 3/8”/16 European thread to ¼”/20 Kodak thread. (CH) Catalog # 700.033 $16.00 each NEW |
|
 |
BolexTM Pistol Grip HAFRA 263.001 (Also referred to as H Delic Hand Grip)with Mechanical Release for Bolex Spring Driven Flat Base Cameras. includes Rapid Attachment Disc and 3-Way Screwdriver. (CH) For Flat-Based H16/H8 Cameras not equipped with an electric motor. It is particularly suitable for hand-held filming with a camera fitted with a Vario-Switar lens. It is provided with a rapid attachment device. It can be supplied with a cable for connecting to the Vario-Switar EE 18-86mm or 100 POE 16-100mm for the pre-selection of the diaphragm. Catalog # 263.001 $420.00 NOS (Check to see if available) |
|
|
BolexTM Pistol Grip HAFRA 263.001 (Also referred to as H Delic Hand Grip) with Mechanical Release for Bolex Spring Flat Based Cameras includes Rapid Attachment Disc and 3-Way Screwdriver (IF LISTED). (CH Catalog # HAFRA $280.00 DEMO includes Disc & 3-Way Screwdriver $210.00 USED does not include Disc or 3-Way Screwdriver $149.00 UGLY Heavier Use does not include Disc or 3-Way Screwdriver |
|
 |
BolexTM Power Grip PONAL 261.001 with Battery Compartment without Battery (CH) (for H16 EBM Electric camera and H16 camera equipped with the ESM or EM motor) This grip incorporates a compartment for the battery and is fitted with a rapid attachment device. It has a start button and a button for diaphragm preselection of the Vario-Switar 100 POE. Designed to fit the contours of the hand, the grip can be swivelled to the most convientient position and the length of the strap adusted, thus ensuring excellent control over the camera. Catalog # 261.001 $00.00 Sorry sold out |
|
|
BolexTM Power Grip PONAL 261.001 with Battery Compartment w/o Battery (CH) (for H16 EBM Electric camera and H16 camera equipped with the ESM or EM motor) Catalog # PONAL $460.00 DEMO or Very Lightly Used $345.00 USED Shows Wear $299.00 UGLY Complete, but heavier use
|
|
 |
BolexTM 263.110 Pistol Grip for Electric Release for all H16 EL Cameras. (CH) For flat-based H16 cameras equipped with the EM or ESM electric motor powered by the 261.660 power-pack or H16 EL camera. Equipped with a built-in micro-switch and a rapid attachment device, it is supplied with a cable for plugging into the remote control socket of the motor or the camera. It can be supplied with a DEVAR 265.030 cable for connecting up to the Vario-Switar 100 POE 16-100 mm f/1.9 for diaphragm preseletion. Works with all models of the H16 EL I - 310xxx, EL II - 311xxx, EL III - 312xxx and forward.Catalog # 263.110 $00.00 NEW Special order only (ONLY available when factory reopens) |
|
| |
BolexTM Brand Pistol Grip for Electric Release for H16 EL (CH) This one works only with H16 EL I Three Pin S/N 310xxxCatalog # ELPOI Sorry Sold Out |
|
 |
BolexTM BASAH
CAMERA BASE ADAPTER to convert Early Round Base Bolex H8/16 cameras to Flat
Bottom Base. Has 1/4"-20 &
3/8"-16 Size Tripod Mounting
Holes in Base. . (CH) Catalog # BASAH $69.00 USED $59.00 Slightly More USED and modified with extra plate on bottom a little ugly because of the plate. |
|
 |
BolexTM BASOU
CAMERA BASE ADAPTER with BOLEX MATTE BOX MOUNT to convert Early Round
Base Bolex H8/16 cameras to Flat Bottom Base . The flat surface base will
support a camera on any plane surface and increased steadiness for tripod
operation. Has 1/4"-20 &
3/8"-16 Size Tripod Mounting
Holes in Base. (CH) Catalog # BASOU $00.00 USED sorry sold out |
|
 |
BolexTM
Rack-Over: Use with Non-Reflex
H8/H16 Bolex Cameras. You can do Critical Focus through your Lens
on the Camera and then move the Camera back so it will be in perfect alignment
with your subject. Has 1/4"-20
& 3/8"-16 mounting screws.
(CH) Catalog # RACKE $129.00 TOP USED CONDITION $ 99.00 NORMAL USED |
|
GITZO TRIPOD with LEVELLING BALL |
|
 |
GITZO 505 B4 Tele Studex Compact Ball 4 with 4 leg Sections. Cosidered perfect for rock solid work. (Without Head). (FR) Supports 50 Lbs. Range 6-74" Folded: 24" Without Head. Tripod Weight 10-1/2 Lbs. Without Head. Catalog # 505 B4 $899.00 NEW only 2 now available |
Bogen / Manfrotto Tripods and Heads |
|
 |
3021N w/o Head. (IT)* Catalog # 3021N List Price: $200.00 Our Price: $141.95 NEW |
 |
3033 Tripod w/o Head (IT)* Catalog # 3033 List Price: $268.00 Our Price: $189.95 NEW |
 |
3068 Universal Cine/Video (w/o Head). (IT)* Catalog # 3068 List Price: $304.00 Our Price: $243.95 NEW |
 |
3190 Professional Cine/Video Tripod w/ 100mm Ball Leveler (3141 BALL) and Spiked Feet. (IT)* Catalog # 3190 List Price: $494.00 Our Price: $348.95 NEW |
 |
3191 Professional Cine/Video Tripod w/ 100mm Ball Leveler (3141 BALL). (IT)* Catalog # 3191 Our Price: $387.95 NEW |
3191 Professional Cine/Video Tripod w/516 Cine/Video Fluid Head and 3141 Ball Leveler. (IT) Catalog # 3194 Our Price: $1,095.00 NEW |
|
Bogen/Manfrotto Cine/VideoTripod Heads |
|
Micro Cine/Video Fluid Head (IT) Catalog # 3126 List Price: $92.00 Our Price: $64.95 NEW |
|
3130 Micro Cine/Video Fluid Head w/Quick Release Plate (3157N) (IT) Catalog # 3130 List Price: $106.00 Our Price: $74.95 NEW |
|
3160 XL Cine/Video Fluid Head w/Quick Release Plate (3157N)) (IT) Catalog # 3160 List Price: $87.00 Our Price: $69.95 NEW |
|
Additional Pan Handle for 3433 (For Dual Handle Operation) (IT) Catalog # 3433HK List Price: $31.00 Our Price: $24.95 NEW |
|
Bogen/Manfrotto Pro Cine/VideoTripod Heads |
|
 |
516 Cine/Video PRO FLUID HEAD w/Sliding Quick Release Plate (IT) Supports 22 lbs. Catalog # 516 Our Price: $752.50 NEW |
Miller Cine/VideoTripod Fluid Heads |
|
 |
101 Miller Junior Cine/Video Fluid Head Supports 10 lbs (4.5 kg) Weight 2 lb 2 oz (0.96 kg) Base Flat/55 mm (2-1/4") Catalog # 101 List Price: $475.00 Our Price $412.95 NEW |
 |
102 Miller Senior "F" Cine/Video Fluid Head with Tilt Lock and Fluid Pan Weight 5 lb (2.27 kg) Supports 20 lbs (9 kg) Base Flat/75mm (3") Catalog # 102 List Price $1155.00 Our Price $982.95 NEW |
 |
106 Miller Light Professional Cine/Video Fluid Head with Tilt Lock and Fluid Pan Supports 30 lbs (15 kg) Weight 5 lb 12 oz (2.6 kg) Base Flat/100 mm (4") Catalog # 106 List Price $1,785.00 Our Price $1,518.95 NEW |
Copyright 2021 ChamblessCine Equipment
